Installation Procedure
- Install the starter and generator positive cable to the vehicle.
- Install the generator positive cable (1) and the generator positive cable retaining nut (2) and tighten to 13 (115 lb in).
- Fold the generator cap (3) to the generator positive cable terminal.
- Install the starter ground cable (5) and the starter nut (6) and tighten to 20 (15 lb ft).
- Install the starter and generator positive cable (3) and the starter and generator positive cable nut (2) and tighten to 13 (115 lb in).
- If equipped, install the front compartment splash shield. Refer to Front Compartment Insulator Replacement .
- Lower the vehicle.
- Clip in the 2 starter and generator positive cable retainers (4) to the transmission brackets.
- Clip in the starter and generator positive cable clip (1) to the oil level indicator tube.
- Install the negative cable (2).
- Install the negative cable nut (1) and tighten to 9 (80 lb in).
- Install the battery positive to starter cable (3) to the battery.
- Install and tighten the battery positive to starter cable nut (2).
- Close the battery fuse box cover (1) and lock the retaining tabs (2, 3)
- Install the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .