Remote Control Door Lock Receiver Scan Tool Information

Remote Control Door Lock Receiver Scan Tool Data Parameters

Parameter	Expected Value	Definition
Operating Conditions: Ignition ON
Key Fob 1 Battery Status	OK	The scan tool displays OK or Low. This is the state of the Fob 1 battery.
Key Fob 1 Function	None	The scan tool displays None, Lock, Driver Door Unlock, All Doors Unlock, Unlatch Rear Closure, Actuate Left Sliding Door, Actuate Right Sliding Door, Panic Alarm, Fuel Door Unlatch, Power Window Control, Folding Top Control, Remote Vehicle Start, Stop Engine, Program Key Fobs, Locate Vehicle Alarm, Rear Body Closure Close, Rear Body Closure Open, Rear Body Closure Stop, Dead Lock All Doors, Rear Body Closure Start or Stop Left Sliding Door Motion. This is the state of the Fob 1 command as monitored by the RCDLR.
Key Fob 1 Status	Learned	The scan tool displays Learned or Not Learned. Learned is displayed if the Fob 1 is programmed into the RCDLR.
Key Fob 2 Battery Status	OK	The scan tool displays OK or Low. This is the state of the Fob 2 battery.
Key Fob 2 Function	None	The scan tool displays None, Lock, Driver Door Unlock, All Doors Unlock, Unlatch Rear Closure, Actuate Left Sliding Door, Actuate Right Sliding Door, Panic Alarm, Fuel Door Unlatch, Power Window Control, Folding Top Control, Remote Vehicle Start, Stop Engine, Program Key Fobs, Locate Vehicle Alarm, Rear Body Closure Close, Rear Body Closure Open, Rear Body Closure Stop, Dead Lock All Doors, Rear Body Closure Start or Stop Left Sliding Door Motion. This is the state of the Fob 2command as monitored by the RCDLR.
Key Fob 2 Status	Learned	The scan tool displays Learned or Not Learned. Learned is displayed if the Fob 2 is programmed into the RCDLR.
Key Fob 3 Battery Status	OK	The scan tool displays OK or Low. This is the state of the Fob 3 battery.
Key Fob 3 Function	None	The scan tool displays None, Lock, Driver Door Unlock, All Doors Unlock, Unlatch Rear Closure, Actuate Left Sliding Door, Actuate Right Sliding Door, Panic Alarm, Fuel Door Unlatch, Power Window Control, Folding Top Control, Remote Vehicle Start, Stop Engine, Program Key Fobs, Locate Vehicle Alarm, Rear Body Closure Close, Rear Body Closure Open, Rear Body Closure Stop, Dead Lock All Doors, Rear Body Closure Start or Stop Left Sliding Door Motion. This is the state of the Fob 3 command as monitored by the RCDLR.
Key Fob 3 Status	Learned	The scan tool displays Learned or Not Learned. Learned is displayed if the Fob 3 is programmed into the RCDLR.
Key Fob 4 Battery Status	OK	The scan tool displays OK or Low. This is the state of the Fob 4 battery.
Key Fob 4 Function	None	The scan tool displays None, Lock, Driver Door Unlock, All Doors Unlock, Unlatch Rear Closure, Actuate Left Sliding Door, Actuate Right Sliding Door, Panic Alarm, Fuel Door Unlatch, Power Window Control, Folding Top Control, Remote Vehicle Start, Stop Engine, Program Key Fobs, Locate Vehicle Alarm, Rear Body Closure Close, Rear Body Closure Open, Rear Body Closure Stop, Dead Lock All Doors, Rear Body Closure Start or Stop Left Sliding Door Motion. This is the state of the Fob 4 command as monitored by the RCDLR.
Key Fob 4 Status	Learned	The scan tool displays Learned or Not Learned. Learned is displayed if the Fob 4 is programmed into the RCDLR.
Front Tire Pressure on Placard	Varies	This displays Counts.
Last Key Fob Detected	Varies	The scan tool displays None, Fob 1, Fob 2, Fob 3, Fob 4 or Fob 5. This was the last Fob used, as monitored by the RCDLR.
Left Front Tire Pressure Sensor Mode	Varies	The scan tool displays Learn Mode - Remotely Triggered, Re-measure, Drive, Powering Down, Wake-up or Learn Mode - Pressure Triggered. This is the state of the left front pressure sensor.
Left Front Tire Pressure Status	Normal	The scan tool displays Unknown, Normal, Low, Flat Tire or High. This is the state of the left front tire pressure.
Left Front Tire Pressure Sensor Status	Normal	The scan tool displays Normal or Failed. This is the state of the left front tire pressure sensor.
Left Front Tire Pressure	Varies	This displays kPa (psi). This is the amount of pressure in the left front tire.
Left Front Tire Pressure Sensor Battery Status	OK	The scan tool displays OK or Low. This is the state of the battery in the left front tire pressure sensor.
Left Rear Tire Pressure Sensor Mode	Varies	The scan tool displays Learn Mode - Remotely Triggered, Re-measure, Drive, Powering Down, Wake-up or Learn Mode - Pressure Triggered. This is the state of the left rear pressure sensor.
Left Rear Tire Pressure Status	Normal	The scan tool displays Unknown, Normal, Low, Flat Tire or High. This is the state of the left rear tire pressure.
Left Rear Tire Pressure Sensor Status	Normal	The scan tool displays Normal or Failed. This is the state of the left rear tire pressure sensor.
Left Rear Tire Pressure	Varies	This displays kPa (psi). This is the amount of pressure in the left rear tire.
Left Rear Tire Pressure Sensor Battery Status	OK	The scan tool displays OK or Low. This is the state of the battery in the left rear tire pressure sensor.
Rear Tire Pressure on Placard	Varies	This displays Counts.
Right Front Tire Pressure Sensor Mode	Varies	The scan tool displays Learn Mode - Remotely Triggered, Re-measure, Drive, Powering Down, Wake-up or Learn Mode - Pressure Triggered. This is the state of the right front pressure sensor.
Right Front Tire Pressure Status	Normal	The scan tool displays Unknown, Normal, Low, Flat Tire or High. This is the state of the right front tire pressure.
Right Front Tire Pressure Sensor Status	Normal	The scan tool displays Normal or Failed. This is the state of the right front tire pressure sensor.
Right Front Tire Pressure	Varies	This displays kPa (psi). This is the amount of pressure in the right front tire.
Right Front Tire Pressure Sensor Battery Status	OK	The scan tool displays OK or Low. This is the state of the battery in the right front tire pressure sensor.
Right Rear Tire Pressure Sensor Mode	Varies	The scan tool displays Learn Mode - Remotely Triggered, Re-measure, Drive, Powering Down, Wake-up or Learn Mode - Pressure Triggered. This is the state of the right rear pressure sensor.
Right Rear Tire Pressure Status	Normal	The scan tool displays Unknown, Normal, Low, Flat Tire or High. This is the state of the right rear tire pressure.
Right Rear Tire Pressure Sensor Status	Normal	The scan tool displays Normal or Failed. This is the state of the right rear tire pressure sensor.
Right Rear Tire Pressure	Varies	This displays kPa (psi). This is the amount of pressure in the right rear tire.
Right Rear Tire Pressure Sensor Battery Status	OK	The scan tool displays OK or Low. This is the state of the battery in the right rear tire pressure sensor.
Selected Front Tire Type	Varies	The scan tool displays No Tire Type, Standard Load, Extra Load, Load Range C, Load Range D or Load Range E. This is the type of front tires used on the vehicle.
Selected Rear Tire Type	Varies	The scan tool displays No Tire Type, Standard Load, Extra Load, Load Range C, Load Range D or Load Range E. This is the type of rear tires used on the vehicle.
Tire Pressure Monitoring Indicator	Off	The scan tool displays On or Off. This is the state of the TPM indicator.
Tire Pressure Monitoring System Status	Enabled	The scan tool displays Enabled or Disabled.
Vehicle Speed	Varies	The scan tool displays km/h or mph.

Remote Control Door Lock Receiver Scan Tool Output Controls

Scan Tool Output Control and Configuration/Reset Functions	Description
Key Fob Button Test	The RCDLR monitors the incoming RF communications to ensure all keyless entry transmitter functions are operating properly. The scan tool displays which buttons have been pressed on transmitters 1 and 2 since the last time the memory was cleared.
Copy and Restore TPM Information	This procedure copies existing setup information from the module.
Erase All Key Fobs	This procedure erases all transmitters and begins the programming process.
Next Available Slot	This procedure programs transmitters to the next slot available slot in the module.
Key Fob 1	Adds a transmitter to slot 1.
Key Fob 2	Adds a transmitter to slot 2.
Key Fob 3	Adds a transmitter to slot 3.
Key Fob 4	Adds a transmitter to slot 4.
Tire/Type/Pressure Selection	The scan tool displays the selections for load range and air pressure.
Tire Pressure Sensors Learn	Places the module in Indicator Sensor Learn mode.