LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Verano Premium, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 400 (Object Detection System - Park Assist System) >> Repair Instructions >> Front Parking Assist Alarm Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.

  1. Insert the sensor into the housing.
  2. Connect the electrical connector to the front object sensor.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals