Component Testing
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Static Test
- Ignition OFF, disconnect the harness connector at the B27D door handle switch - driver exterior.
- With the switch in the open position, test for infinite resistance between the signal terminal 2 and the ground terminal 1.
- If not the specified value, replace the B27D door handle switch - driver exterior.
- With the switch in the closed position, test for less than 5 Ω between the signal terminal 2 and the ground terminal 1
- If greater than the specified range, replace the B27D door handle switch - driver exterior.