Circuit/System Verification
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the keyless entry functions operate with all available keyless entry transmitters.
- If the keyless entry functions do not operate properly
Refer to Keyless Entry System Malfunction (Passive) , Keyless Entry System Malfunction (Active) .
- If the keyless entry functions operate properly
- If the keyless entry functions do not operate properly
- Observe the scan tool BCM Remote Start Diagnostic Status History and the ECM Remote Vehicle Start Disable History parameters. Verify that no Diagnostic Status History or Start Disable items are present.
- If remote vehicle start disable history items are present
Refer to the appropriate subsection in which the malfunction occurred.
- If remote vehicle start disable history items are not present
- If remote vehicle start disable history items are present
- Verify all the scan tool BCM Content Theft Trigger History parameters display None.
- If any BCM Content Theft Trigger History parameter does not display None
Refer to Content Theft Deterrent Malfunction .
- If all the BCM Content Theft Trigger History parameters display None
- If any BCM Content Theft Trigger History parameter does not display None
- All OK.