LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Cellular Systems, Entertainment Systems & Navigation Systems) >> Diagnostic Information and Procedures >> OnStar Audio Malfunction >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X2 harness connector at the radio.
  2. Ignition ON, test for a varying AC voltage between the following signal circuit terminals listed below and ground when the OnStar® Call Center button is pressed.
    • Audio Signal Circuit- terminal 8
    • Audio Common Circuit- terminal 16
    • If AC voltage was not present, test the circuit for a short to voltage, short to ground, or an open/high resistance. If the circuit tests normal, replace the CIM.
  3. If all circuits test normal, replace the radio.
scientia non olet · About LEMON Manuals