LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Shift Lock Control System) >> Diagnostic Information and Procedures >> DTC B270A >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.

Dynamic Test

  1. Install a 10 A fused jumper wire between the control terminal 4 and 12 V. Momentarily install a jumper wire between the ground terminal 2 and ground.
  2. Verify the solenoid turns on & off/clicks, etc.
    • If the solenoid does not turn on & off/clicks, etc. 

      Replace the S3 transmission shift lever.

    • If the solenoid does turn on & off/clicks, etc. 
  3. All OK
scientia non olet · About LEMON Manuals