Immobilizer-Keyless Control Unit Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the steering column covers (see GLOVE BOX STRIKER REPLACEMENT )
Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).

Fig 1: Identifying 7P Connector And Immobilizer-Keyless Control Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the two screws and the immobilizer-keyless control unit.
Install the immobilizer-keyless control unit in the reverse order of removal.
After replacement, register the immobilizer-keyless control unit (see IMMOBILIZER KEY REGISTRATION ), and make sure the immobilizer system works properly.
Program all of the customer's keys/keyless transmitters (see IMMOBILIZER-KEYLESS CONTROL UNIT REPLACEMENT ).