LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Engine Controls/Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Fuel Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the fuel feed pipe from the fuel pump. Refer to Fuel Line Replacement - Chassis .
    2. Fig 1: Fuel Pump Cover & Fasteners
    GM2577149Courtesy of GENERAL MOTORS COMPANY
  2. Remove the fuel pump cover nut (1) and the 2 fuel pump cover bolts (2).
  3. Unclip the wiring harness from the fuel pump cover (3).
  4. Remove the fuel pump cover (3).
    5. Fig 2: Fuel Pump Insulator
    GM2577148Courtesy of GENERAL MOTORS COMPANY
  5. Remove the fuel pump insulator (1).
  6. Remove the fuel feed intermediate pipe. Refer to Fuel Feed Intermediate Pipe Replacement .
    7. Fig 3: Fuel Pump, Seal Ring & Gasket
    GM2577147Courtesy of GENERAL MOTORS COMPANY
  7. Remove 2 the fuel pump bolts (4).
  8. Remove the fuel pump (3) with the seal ring (2) and the gasket (1).
    9. Fig 4: Valve Lifter Follower
    GM2577150Courtesy of GENERAL MOTORS COMPANY
  9. Remove the valve lifter follower (1).
scientia non olet · About LEMON Manuals