Removal Procedure
WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the three way catalytic converter. Refer to Three-Way Catalytic Converter Replacement .
- Remove the radiator outlet pipe. Refer to Radiator Outlet Pipe Replacement .
- Remove the water pump cover. Refer to Water Pump Cover Replacement .
- Install the EN-44602 holding tool (1) to the water pump sprocket.
- Remove the 3 water pump sprocket bolts (2) from the water pump sprocket through the EN-44602 holding tool (1).
- Loosen completely the 2 water pump bolts (1) from the engine front cover.
- Remove the 2 water pump bolts (1) and remove the water pump (2).
NOTE:
Do not remove the bolts out of the front cover holes.