LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Sunroof Window & Screws
    GM1547376Courtesy of GENERAL MOTORS CORP.
  1. Position the sunroof window into the opening.
  2. Ensure that the window trade mark is to the rear of the opening and that sunroof window attachment tabs are to the inboard side of the mounting arms.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the sunroof window screws (1) to the window. Do not tighten the screws.

    Tighten the screws to 4 N.m (35 lb in).

  4. Carefully close the sunroof window from the vent position to the full closed position.
  5. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment (Sedan)  or Sunroof Window Height and Opening Fit Adjustment (Coupe) .
  6. Close the sunshade.
  7. Cycle the sunroof window to ensure proper operation and fit.
scientia non olet · About LEMON Manuals