LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Antilock Brake System With Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0460 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the scan tool perform the steering position sensor calibration.
  2. Clear DTC and operate the vehicle within the conditions for running the DTC. Verify the DTC does not reset.
    • If the DTC resets, refer to circuit testing.
scientia non olet · About LEMON Manuals