LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Antilock Brake System With Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0131 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

  1. Verify that DTC C0277, C0278 or C0870 is not set.
  2. Perform the BPPS calibration. Refer to Brake Pedal Position Sensor Calibration
  3. Perform the SAS calibration to reset the brake pressure sensor offset values. Refer to Steering Angle Sensor Centering 
  4. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset.
    • If DTC is set, replace the BPMV. If DTC reset replace the EBCM.
scientia non olet · About LEMON Manuals