Circuit/System Verification
NOTE:
This DTC may be stored as a history DTC without affecting the operation of the module. If stored only as a history DTC and not retrieved as a current DTC, do not replace the module.
- Ignition ON.
- Verify DTC P0602 is not set.
- If DTC P0602 is set
- Program the K27 fuel pump control module.
- Verify the DTC does not set.
- If the DTC sets, replace the K27 fuel pump control module.
- If the DTC does not set.
- All OK.
- If DTC P0602 is not set
- Verify DTCs P0601, P0603, P0604, P0606, and P062F are not set.
- If any of the DTCs are set
- Program the K27 fuel pump control module.
- Verify the DTC does not set.
- If the DTC sets, replace the K27 fuel pump control module.
- If the DTC does not set.
- All OK.
- If none of the DTCs are set
- All OK