Windshield Wiper Transmission Replacement

WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Windshield Wiper Transmission

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement . Remove the dash panel bolts and brace.
1	Windshield Wiper Transmission Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure Lift the windshield wiper transmission from the plenum. Disconnect the electrical connector from the windshield wiper motor. Remove the windshield wiper transmission from the vehicle. Tighten 9 N.m (80 lb in)
2	Windshield Wiper Motor Crank Arm
3	Windshield Wiper Motor Bolt (Qty 3) Procedure Remove the windshield wiper motor. Refer to Windshield Wiper Motor Replacement .
4	Windshield Wiper Motor
5	Windshield Wiper Transmission Assembly