LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Regal GS, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System - Park Assist System >> Repair Instructions >> Front Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Disconnect electrical from the front object sensor.
    3. NOTE:

    The front object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.

  3. Lift the locking tabs on the housing and remove the front object sensor.
scientia non olet · About LEMON Manuals