LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> LaCrosse Hybrid >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Controls/Fuel - 2.4L (LUK) - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement

Fuel Pump Flow Control Module Replacement

Fig 1: Fuel Pump Flow Control Module
GM2579093Courtesy of GENERAL MOTORS COMPANY
Fuel Pump Flow Control Module Replacement

Callout Component Name
Preliminary Procedure 
Remove the passenger rear side trim panel. Refer to Rear Compartment Side Trim Panel Replacement (without HP6) and Rear Compartment Side Trim Panel Replacement (HP6, Left Side) or Rear Compartment Side Trim Panel Replacement (HP6, Right Side) .
1 Fuel Pump Flow Control Module Fastener
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Fuel Pump Flow Control Module

Procedure

  1. Disconnect the electrical connector.
  2. If replacing, reprogram the module. Refer to Control Module References .
scientia non olet · About LEMON Manuals