LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Data Communication System) >> Diagnostic Information and Procedures >> DTC B1001: Option Configuration >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC B1001 is not set.
    • If DTC B1001 is set 
    1. Program the device that set the DTC.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the device that set the DTC.
      • If the DTC does not set
    3. All OK.
    • If DTC B1001 is not set 
  3. All OK
scientia non olet · About LEMON Manuals