LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Programming And Setup - All Systems) >> Repair Instructions >> Power Steering Control Module Programming and Setup >> Power Steering Control Module Reprogramming

Power Steering Control Module Reprogramming

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Do not reprogram the power steering control module unless directed by a service procedure or a service bulletin.

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Power Steering Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals