LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Suspension Measurement
    GM2906841Courtesy of GENERAL MOTORS COMPANY
  1. Record the front suspension measurement (p) at curb weight.

    Measurement (p) is the distance from the center of the wheel to the bottom of the front fender.

  2. Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
  3. Fig 2: Steering Knuckle Nut And Bolt
    GM2899459Courtesy of GENERAL MOTORS COMPANY
  4. Steering Knuckle Nut (1) - Remove
  5. Steering Knuckle Bolt (2) - Remove
  6. Fig 3: Front Lower Control Arm Front Bolt And Nut
    GM2899460Courtesy of GENERAL MOTORS COMPANY
  7. Front Lower Control Arm Front Bolt (1) - Remove
  8. Front Lower Control Arm Front Nut (2) - Remove
  9. Fig 4: Front Lower Control Arm Rear Nut And Bolt
    GM2899463Courtesy of GENERAL MOTORS COMPANY
  10. Front Lower Control Arm Rear Nut (1) - Remove
  11. Front Lower Control Arm Rear Bolt (2) - Remove
  12. Remove the front lower control arm (3) from the vehicle.