Windshield Washer Solvent Container Replacement

Preliminary Procedure

1. Remove the windshield washer solvent container filler tube. Refer to Windshield Washer Solvent Container Filler Tube Replacement 
2. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (Buick) .
3. Disconnect the windshield washer pump hose.

1. Remove washer solvent container from the front compartment panel assembly and lower the washer container from the wheelhouse compartment.
2. Drain the windshield washer solvent into a suitable clean container.
3. Transfer the component parts as needed.
4. Install a new grommet prior to installing the windshield washer pump into the washer solvent container.
5. Fill the windshield washer solvent container after installation.