Oil Filter Feed Pipe Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT ).
Remove the oil filter feed pipe.

Fig 1: Identifying Oil Filter Feed Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold one nut with a wrench, then tighten the other nut.

Fig 2: Identifying Oil Filter Feed Pipe Nut
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Tighten the oil filter feed pipe to 39 N.m (4.0 kgf.m, 29 lbf.ft), then remove the nuts from the oil filter feed pipe.
Install the oil filter (see ENGINE OIL FILTER REPLACEMENT ).