Manifold Absolute Pressure Sensor Replacement
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement . |
|
| 1 | Manifold Absolute Pressure Sensor Fastener (Qty: 2)
CAUTION:
Refer to Fastener Caution
. Procedure: Disconnect the electrical connector. Tighten: 4 N.m (36 lb in) |
| 2 | Manifold Absolute Pressure Sensor |