LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P0C01 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Verify DTCs P0BE6, P0BE7, P0BE8, P0BEE, P0BEF, and P0BF0 are not set.
  2. If the DTC is set, clear DTC; Turn the ignition OFF for 2 minutes. Turn the ignition ON, Operate vehicle within conditions for running and setting DTC. If the DTC resets, go to Circuit/System Testing.
scientia non olet · About LEMON Manuals