Fastener Tightening Specifications
WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Catalytic Converter Brace Fastener (LHU) | 58 N.m | 43 lb ft |
| Catalytic Converter Brace Bracket Fastener (LHU) | 58 N.m | 43 lb ft |
| Catalytic Converter-to-Bending Brace Fastener (LHU) | 35 N.m | 26 lb ft |
| Catalytic Converter-to-Exhaust Manifold Fastener (LUK) | 50 N.m | 37 lb ft |
| Catalytic Converter-to-Exhaust Front Pipe Fastener (L4) | 25 N.m | 18 lb ft |
| Catalytic Converter-to-Exhaust Front Pipe Fastener (LHU) | 35 N.m | 26 lb ft |
| Catalytic Converter-to-Turbocharger (LHU) | 58 N.m | 43 lb ft |
| Exhaust Front Pipe Hanger Bracket Fastener | 60 N.m | 44 lb ft |
| Exhaust Front Pipe-to-Muffler Fastener | 18 N.m | 13 lb ft |
| Exhaust Manifold Fastener | 14 N.m | 124 lb in |
| Exhaust Manifold Heat Shield Fastener | 10 N.m | 89 lb in |
| Exhaust Rear Pipe Hanger Bracket Fastener | 20 N.m | 15 lb ft |