LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> DTC B125C >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the digital radio antenna coax cable from the radio. Connect the EL-48028  to the radio and place on the roof of the vehicle. See Special Tools .
  2. Ignition ON, radio tuned to XM channel 1. Verify DTC B125C is not set as current and XM reception is improved.
    • If DTC B125C is set as current or the reception is not improved, replace the radio.
  3. Ignition OFF, reconnect the antenna coax cable at the radio. Disconnect the antenna coax cable from the digital radio antenna.
  4. Ignition ON, radio ON, test for 4.5-5.5 V between the antenna coax cable center terminal and an outer shield.
    • If less than the specified range, test the antenna coax cable for an open/high resistance.
    • If greater than the specified range, test the antenna coax cable for a short to voltage.
  5. If all circuits test normal, replace the digital radio antenna.
scientia non olet · About LEMON Manuals