Circuit/System Testing
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the B24 Cellular Phone Microphone.
- Ignition OFF, test for less than 10 Ω between outer shield and ground.
- If greater than the specified range, test the outer shield circuit for an open/high resistance. If the circuit tests normal, replace the K82 Mobile Telephone Control Module.
- Ignition OFF, test for less than 10 Ω between low reference circuit terminal 2 and ground.
- If greater than the specified range, test the low reference circuit for an open/high resistance. If the circuit tests normal, replace the K82 Mobile Telephone Control Module.
- Ignition ON, test for 9-11 V between the signal circuit terminal 3 and ground.
- If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the K82 Mobile Telephone Control Module.
- If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K82 Mobile Telephone Control Module.
- If all circuits test normal, replace the B24 Cellular Phone Microphone.