LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Continuously Variable Transmission (CVT)) >> A/T Interlock System >> Shift Lock Solenoid Test

Shift Lock Solenoid Test

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard.
    Fig 1: Identifying DLC
    G06430324Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Turn the ignition switch to ON (II).
  3. Make sure the HDS communicates with the PCM. If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING ).
  4. Select shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS.
  5. Make sure that the shift lever can be moved out of P when Shift Lock Solenoid : ON. Move the shift lever back in P, and make sure it locks with Shift Lock Solenoid: OFF.
  6. Make sure that the shift lock releases when the shift lock release is pushed, and make sure it locks when the shift lock release is released.
  7. If shift lock solenoid does not work properly, troubleshoot shift lock system (see SHIFT LOCK SYSTEM CIRCUIT TROUBLESHOOTING  ).
scientia non olet · About LEMON Manuals