Component Testing

Relay Test

1. Ignition OFF, disconnect the KR113 child security lock disable relay.
2. Test for 60-180 Ω between terminals 1 and 2.
   • If the not within the specified range, replace the KR113 child security lock disable relay.
3. Test for infinite resistance between the following terminals:
   • 3 and 2
   • 3 and 5
   • 3 and 1
   • 1 and 5
   • If not the specified value, replace the KR113 child security lock disable relay.
4. Install a 5 A fused jumper wire between relay terminal 2 and 12 V. Install a jumper wire between relay terminal 1 and ground. Test for less than 2 Ω between terminals 3 and 5.
   • If greater than the specified range, replace the KR113 child security lock disable relay.