LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2012 >> Enclave FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Installation Procedure

Installation Procedure

    Fig 1: View Of Negative Battery Cable Terminal & Nut
    GM1860912Courtesy of GENERAL MOTORS COMPANY
  1. Position and install the negative battery cable to the battery negative terminal (2).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Tighten the negative battery cable terminal (1) nut.

    Tighten 

    Tighten the nut to 9 N.m (80 lb in).

    3. Fig 2: Identifying Battery Cover Screw & Cover
    GM1860911Courtesy of GENERAL MOTORS COMPANY
  3. Install the battery cover and screw.

    Tighten 

    Tighten the screw to 1.6 N.m (14 lb in).

  4. Reset all of the customers radio station presets.
  5. Install the middle row floor matt, if equipped.
scientia non olet · About LEMON Manuals