Power Steering Pump Pulley Replacement

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Steering Pump Pulley

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Power Steering Pump Replacement
1	Power Steering Pump Pulley Procedure Use the CH-25034-C pulley remover to remove the power steering pump pulley. Use the CH-25033-C pulley installer to install the power steering pump pulley. NOTE: Ensure the power steering pump pulley is flush with the end of the power steering pump shaft. Ensure the power steering pump pulley is aligned with the other pulleys on the front of the engine. Special Tools CH-25033-C Pulley Installer CH-25034-C Pulley Remover Equivalent regional tools:Special Tools

Callout

Component Name

Preliminary Procedure
Power Steering Pump Replacement

Power Steering Pump Pulley

Procedure

Use the CH-25034-C pulley remover to remove the power steering pump pulley.
Use the CH-25033-C pulley installer to install the power steering pump pulley.

NOTE:

Ensure the power steering pump pulley is flush with the end of the power steering pump shaft.
Ensure the power steering pump pulley is aligned with the other pulleys on the front of the engine.

Special Tools

CH-25033-C Pulley Installer
CH-25034-C Pulley Remover

Equivalent regional tools:Special Tools