Removal Procedure

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Level Sensor Electrical Connector Tab

Courtesy of GENERAL MOTORS COMPANY

Remove the fuel tank module. Refer to Fuel Tank Module Replacement .
Push down on the fuel level sensor electrical connector tab (1), disengaging the retainer and disconnect the electrical connector.

Fig 2: Module Wiring Clip

Courtesy of GENERAL MOTORS COMPANY

Remove the fuel level sensor wiring from under the module clip (2).
Push in the fuel level sensor tabs (1) disengaging the sensor clips from the module bucket.

Fig 3: Fuel Module Bucket

Courtesy of GENERAL MOTORS COMPANY

Slide the fuel level sensor up out from the module bucket.