LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Regal CXL Turbo, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Wheel Speed Sensor & Harness Clip
    GM2278446Courtesy of GENERAL MOTORS CORP.
  1. Install the wheel speed sensor (1) to the steering knuckle.
  2. Install the harness clip (2) to the steering knuckle.
    3. Fig 2: Wheel Speed Sensor Bolt
    GM2278445Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the wheel speed sensor bolt (1) and tighten to 9 N.m (80 lb in).
    4. Fig 3: Wheel Speed Sensor Electrical Connector & Harness Clips
    GM2278444Courtesy of GENERAL MOTORS CORP.
  4. Connect the wheel speed sensor electrical connector (1) and secure the connector to the frame.
  5. Install the harness clip (2) to the frame.
  6. Install the harness clips (3) to the lower control arm.
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  8. Perform the Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals