LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Lucerne Super >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.6L - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying CKP Sensor Wiring Harness Electrical Connector
    GM1672558Courtesy of GENERAL MOTORS COMPANY
  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
  2. Disconnect the crankshaft position (CKP) sensor wiring harness electrical connector (1) from the CKP sensor.
    3. Fig 2: Locating CKP Sensor Wiring Harness Electrical Connector
    GM1672560Courtesy of GENERAL MOTORS COMPANY
  3. Remove the CKP sensor bolt. (cylinder heads shown removed, for clarity).
  4. Remove the CKP sensor.
scientia non olet · About LEMON Manuals