LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Power Steering Gear Heat Shield & Mounting Bolts
    GM293350Courtesy of GENERAL MOTORS COMPANY
  1. Install the power steering gear heat shield.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the power steering gear heat shield retaining bolts.

    Tighten 

    Tighten the power steering gear heat shield retaining bolts to 9 N.m (80 lb in).

  3. Install the plastic clip to the power steering gear heat shield.
  4. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals