LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Rack and Pinion Boot Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rack & Pinion Boot with J 22610
    GM297371Courtesy of GENERAL MOTORS COMPANY
  1. Install the rack and pinion boot (3) to the steering gear.
  2. Install a new rack and pinion boot clamp.
  3. Using J 22610  crimp the rack and pinion boot clamp.
    4. Fig 2: View of Tie Rod End Clamp and Rack & Pinion Boot
    GM297362Courtesy of GENERAL MOTORS COMPANY
  4. Install the tie rod end clamp (2) to the rack and pinion boot (1).
    5. Fig 3: Identifying Inner Tie Rod Assembly Jam Nut
    GM297360Courtesy of GENERAL MOTORS COMPANY
  5. Install the hex jam nut (2) to the inner tie rod assembly.
  6. Install the outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
  7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  8. Lower the vehicle.
  9. Adjust the toe alignment. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .
scientia non olet · About LEMON Manuals