LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.9L - Repair Instructions >> Repair Instructions >> Heated Oxygen Sensor Replacement - Sensor 1 >> Removal Procedure

Removal Procedure

CAUTION:

Refer to Heated Oxygen and Oxygen Sensor Caution .

    Fig 1: View Of HO2S Electrical Connector Clip & Ignition Coil Bracket
    GM1609170Courtesy of GENERAL MOTORS COMPANY
  1. Remove the connector position assurance (CPA) retainer (3).
  2. Disconnect the heater oxygen sensor (HO2S) electrical connector (2).
  3. Remove the oxygen sensor electrical connector from the ignition coil bracket.
    4. Fig 2: View Of HO2S & J 39194-B
    GM1618175Courtesy of GENERAL MOTORS COMPANY
  4. Remove the HO2S from the exhaust manifold.
scientia non olet · About LEMON Manuals