LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.9L - Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (NU6) >> Removal Procedure

Removal Procedure

    Fig 1: Fuel Tank Wiring Harness Electrical Connector
    GM1755107Courtesy of GENERAL MOTORS COMPANY
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the fuel tank wiring harness electrical connector (2) from the fuel tank pressure sensor.
  3. Remove the fuel tank pressure sensor and seal assembly (1).
scientia non olet · About LEMON Manuals