Installation Procedure

Fig 1: View of Garage Door Opener, GDO Fasteners, Electrical Connector

GM490402

Courtesy of GENERAL MOTORS COMPANY

Connect the garage door opener (GDO) electrical connector (4).
Place the GDO (5) into the overhead console. Ensure the GDO buttons are placed correctly in their designated openings.

CAUTION:

Refer to Fastener Caution .

Install the fasteners (3).
Tighten

Tighten the fasteners (3) to 2 N.m (18 lb in).
Install the overhead console. Refer to Roof Console Replacement .
Program the GDO. Refer to Control Module References for programming and setup information.