LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> LaCrosse CXS >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Rear Toe Adjustment

Rear Toe Adjustment

    Fig 1: Cam Bolt
    GM2018868Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not tighten the new fasteners yet in order to allow for movement.
  1. Measure the alignment on an alignment rack. Refer to Wheel Alignment Measurement .
  2. Rotate the cam nut in order to adjust the toe angle. Refer to Wheel Alignment Specifications .
  3. Hand tighten the cam bolt, but do not tighten the bolt to the specification yet.
  4. Reinspect the rear toe angle and adjust as necessary.
    5. CAUTION: Refer to Fastener Caution .
  5. Hold the cam nut and tighten the cam bolt.

    Tighten:  150 N.m (111 lb ft)

  6. Repeat the procedure for the other rear wheel.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals