LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> LaCrosse CXS >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Boot Replacement >> Removal Procedure

Removal Procedure

  1. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
  2. If equipped, remove the steering gear heat shield.
    3. Fig 1: View Of Rack Assembly, Tie Rod Clamp, Nut And Rack & Pinion Boot
    GM82237Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering linkage inner tie rod nut (5) from the steering linkage inner tie rod.
  4. Remove the steering gear boot clamp (4).
  5. Cut and discard the steering gear boot clamp (2).
    6. NOTE: After removing the boot, inspect the inner tie rod for evidence of corrosion or contamination. If none is evident, continue with the repair. If corrosion or contamination is evident, replace the steering gear.
  6. Remove the steering gear boot (3) from the steering gear (1).
scientia non olet · About LEMON Manuals