LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Lucerne Super >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Fuel Sender Access Hole Cover
    GM1671970Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear compartment liner. Refer to Rear Compartment Trim Panel Replacement .
  2. Remove the fuel sender access hole cover bolts.
  3. Remove the fuel sender access hole cover.
    4. Fig 2: Identifying Fuel Level Sensor Wiring Harness Electrical Connector
    GM1671971Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the fuel level sensor wiring harness electrical connector (1) fuel tank pressure sensor.
  5. Remove the fuel tank pressure sensor.
scientia non olet · About LEMON Manuals