LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Lucerne Super >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L - Introduction >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Accelerator Pedal Position (APP) Sensor
    GM1671027Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Disconnect the body harness electrical connector (1) from the accelerator pedal position (APP) sensor.
    3. Fig 2: Identifying Accelerator Pedal Nuts
    GM1671028Courtesy of GENERAL MOTORS CORP.
  3. Remove the accelerator pedal nuts.
  4. Remove the accelerator pedal.
scientia non olet · About LEMON Manuals