LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure Super >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Windshield Wiper System Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
    2. Fig 1: Identifying Wiper Transmission & Wiper Motor Crank Arm
    GM306506Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the wiper transmission link from the wiper motor crank arm using the J 39232  .
    3. Fig 2: View Of Wiper Drive System Module & Screws
    GM815220Courtesy of GENERAL MOTORS CORP.
  3. Remove the wiper drive system module screws.
  4. Rotate the wiper drive system module to access the wiper motor electrical connector.
  5. Disconnect the wiper motor electrical connector.
  6. Remove the wiper drive system module from the vehicle.
scientia non olet · About LEMON Manuals