Installation Procedure

Fig 1: Battery Current Sensor

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure that the tape tab is pointing away from the battery prior to installation.

Slide the NEW battery current sensor (1) up onto the battery cable.
Using NEW tie straps and electrical tape (2), attach the battery current sensor (1) to the positive battery cable.

Fig 2: Identifying Negative Battery Cable Terminal & Battery

Courtesy of GENERAL MOTORS CORP.

Install the positive and negative battery cable. Refer to Battery Positive and Negative Cable Replacement (LS4) .
Connect the I/P harness electrical connector (2) to the battery current sensor.