Brake Pedal Position Sensor Replacement
WARNING: This page is about a different car, the 2010 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Brake system does not use a brake switch, stoplight switch or brakelight switch. System uses a Brake Pedal Position Sensor to control these functions.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the accelerator pedal. Refer to Accelerator Pedal Position Sensor Replacement . |
|
| 1 | Accelerator Pedal Assembly Nut (Qty: 3)
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 2 | Accelerator Pedal Assembly |
| 3 | Brake Pedal Position Sensor Bolt Tighten: 2 N.m (18 lb in) |
| 4 | Brake Pedal Position Sensor Tip:
|