LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Lucerne CX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster. Refer to Driver Knee Bolster Replacement .
  2. Remove the steering column trim covers.
    3. Fig 1: View of Automatic Transmission Shift Lock Control Connector
    GM420205Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the automatic transmission shift lock control connector.
    4. Fig 2: View of Automatic Transmission Shift Lock Control
    GM420208Courtesy of GENERAL MOTORS CORP.
  4. Use a screwdriver to pry the automatic transmission shift lock control from the steering column support assembly.
  5. Remove the automatic transmission shift lock control from the steering column.
scientia non olet · About LEMON Manuals