LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Lucerne CX >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View of Height Sensor Connector and Sensor Link From Ball Stud
    GM517954Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the wheel from the vehicle. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the height sensor connector.
  4. Disconnect the sensor link from the ball stud.
  5. Loosen the sensor mounting nut.
  6. Disengage the anti-rotation tab and slide the sensor downward.
  7. Remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals