LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXS >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Configurable Customer Control System >> Diagnostic Information and Procedures >> Steering Wheel Controls Inoperative >> Component Testing

Component Testing

CAUTION: Refer to SIR Caution .
  1. Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
  2. Test for infinite resistance between the signal circuit terminal 4 and voltage circuit terminal 3 with the switch in the open position.
    • If not the specified value, replace the switch.
  3. Test for less than 6,800 ohms of resistance between the signal circuit and the voltage circuit with the switch in the closed position.
    • If greater than the specified range, replace the switch.