LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CX >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C0131 >> Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC C0277, C0297, or B3445 is not set.
    • If any of the DTCs are set, refer to
  2. Ignition ON, observe the scan tool BPP parameter while applying and releasing the brake pedal. The reading should change between Applied and Released.
    • If the parameter does not change between applied and release, replace the BPMV and verify DTC does not reset. If DTC reset, replace the EBCM.
scientia non olet · About LEMON Manuals